Summary
Muhammad Ahsan received his PhD in Energetic Materials Engineering from National university of Sciences and Technology, Islamabad, Pakistan under the supervision of Prof. Dr. Arshad Hussain.
Academic Background
PhD
(Energetic Materials Engineering) NUST, Islamabad
February 07, 2011 - September 23, 2016
Honours and Awards
Publications
Experimental validation and optimization of bendable linear shaped charges with degressive explosive thickness for aerospace and defense applications
April 24, 2025
Journal of Energetic Materials - 1-33
Computational Analysis of Catalytic Combustion Using Finite Volume Method (FVM): Advantages, Constraints, and Potential Applications
April 10, 2025
Engineering Proceedings - Volume 67(1), Article Number 89
Quantification of Impact of Uncertainty on Emissions in a Cement Manufacturing Plant: Surrogate Modeling-Based Approach
March 11, 2025
ACS Omega - Volume:10, Issue:9, Pages 9453-9462
Development and Evaluation of User-Friendly Modeled Approach for Sustainable Polymer Membranes for Advanced Hemodialysis
January 06, 2025
Advanced Materials Interfaces - Volume:12, Issue:1, Article Number 2400435
Computational Fluid Dynamics Simulation and Analysis of Non-Newtonian Drilling Fluid Flow and Cuttings Transport in an Eccentric Annulus
December 30, 2024
Mathematics - Volume:13, Issue:1, Article Number 101
Improving Internal Combustion Engine Performance through Inlet Valve Geometry and Spray Angle Optimization: Computational Fluid Dynamics Study
October 15, 2024
Engineering Proceedings - Volume 72(1), Article Number 6
Grey-box modelling for estimation of optimum cut point temperature of crude distillation column
October 07, 2024
CAAI Transactions on Intelligence Technology - Pages 1-15
Integrative CFD and AI/ML-based modeling for enhanced alkaline water electrolysis cell performance for hydrogen production
August 15, 2024
International Journal of Hydrogen Energy - Volume 83, Pages 1120-1131
Modelling the heat transition
July 27, 2024
Mathematics in Industry Reports (MIIR) - Pages 1-48
Prediction and optimization of emissions in cement manufacturing plant under uncertainty by using artificial intelligence‑based surrogate modeling
June 03, 2024
Environment Development and Sustainability - Pages 1-25
Free-Flowing Polymer-Bonded Powder Composition of Hexahydro-1,3,5-trinitro-1,3,5-triazine using Solvent-Slurry Coating
March 19, 2024
Polymers - Volume 16(6), 841
Influence of distributor plate design on mixing characteristics of rice husk biomass in a bubbling fluidized bed gasifier: An experimental and CFD study
February 15, 2024
Fuel - Volume 358, Part A, Article Number 129893
Optimizing Design and Operational Parameters for Enhanced Mixing and Hydrodynamics in Bubbling Fluidized Bed Gasifiers: An Experimental and CFD-based Approach
August 16, 2023
Applied Sciences - Volume: 13, Issue: 16, Article Number:9317
Computational Fluid Dynamics Analysis of a Hollow Fiber Membrane Module for Binary Gas Mixture
May 22, 2023
Gases - Volume 3(2), Pages 77-91
Optimization based comparative study of machine learning methods for the prediction of bio-oil produced from microalgae via pyrolysis
March 01, 2023
Journal of Analytical and Applied Pyrolysis - Volume 170, ID:105879
Techno-economic Analysis of Facilitated Transport Membranes (FTMs) Based CO2 Separation Processes
February 14, 2023
Book on Facilitated Transport Membranes (FTMs) for CO2 Capture: Overview and Future Trends - Chapter 9, Pages 249-265
Study of ferroelectric and piezoelectric response of heat-treated surfactant-based BaTiO3 nanopowder for high energy capacitors
January 01, 2023
Materials Science and Engineering B - Volume 287, Article Number 116100
Prediction of optimum operating conditions of a furnace under uncertainty: An integrated framework of artificial neural network and genetic algorithm
December 15, 2022
Fuel - Volume 330, Article Number 125563
An intelligent sensing system for estimation of efficiency of carbon-capturing unit in a cement plant
December 01, 2022
Journal of Cleaner Production - Volume 377, Article Number 134359
Model analysis on effect of temperature on the solubility of recycling of Polyethylene Terephthalate (PET) plastic
November 01, 2022
Chemosphere - Volume 307, Part 3, Article Number 136050
Hydrogen production optimization from sewage sludge supercritical gasification process using machine learning methods integrated with genetic algorithm
August 01, 2022
Chemical Engineering Research and Design - Volume 184, Pages 614-626
Comparative hydrodynamics study of fluidized bed gasifier incorporating static and rotating air distributor plates: A CFD approach
June 01, 2022
Powder Technology - Volume 405, Article Number 117500
Process modeling and simulation of ethylene oxide production by implementing pinch and cost analysis
May 01, 2022
Ain Shams Engineering Journal - Volume 13, Issue 3, Pages 101585 (1-9)
Improved super capacitive performance of hydrothermally developed Mn and Ni oxides along with activated carbon as ternary nanocomposite
February 01, 2022
Journal of Physics and Chemistry of Solids - Volume 161, Article Number 110467
Process Modeling, Optimization and Cost Analysis of a Sulfur Recovery Unit by Applying Pinch Analysis on the Claus Process in a Gas Processing Plant
December 27, 2021
Mathematics - Volume 10, Issues 1, Article Number 88
Design and Development of a Computational Tool for a Dialyzer by Using Computational Fluid Dynamic (CFD) Model
November 24, 2021
Membranes - Volume 11, Issues 12, Article Number 916
Model-Based Quality, Exergy, and Economic Analysis of Fluidized Bed Membrane Reactors
October 03, 2021
Membranes - Volume 11, Issues 10, Article Number 765
Computational Analysis of the Hydrodynamic Behavior for Different Air Distributor Designs of Fluidized Bed Gasifier
July 28, 2021
Frontiers in Energy Research - Volume 9, Issues 1, Article Number 692066
Performance Analysis of Blended Membranes of Cellulose Acetate with Variable Degree of Acetylation for CO2/CH4 Separation
March 29, 2021
Membranes - Volume 11, Issue 4, Article Number 245
Computational Fluid Dynamics (CFD) Modeling and Simulation of Flow Regulatory Mechanism in Artificial Kidney Using Finite Element Method
July 03, 2020
Membranes - Volume 10, Issue no. 7, Article 139
Computational Fluid Dynamics (CFD) simulation for the prediction of the venturi scrubber performance using Finite Volume Method
May 06, 2020
International Journal of Computing Science and Mathematics - Volume 11, Issue 4, Pages 338-346
Computational Fluid Dynamics Analysis of Compressible Flow Through a Converging-Diverging Nozzle using the k-ε Turbulence Model
February 10, 2020
Engineering, Technology & Applied Science Research - Volume 10 Issue 1 Pages 5180-5185
Jute Based Bio and Hybrid Composites and Their Applications
September 01, 2019
Fibers - Volume 7, Issue 9, Article Number 77
A Computational Fluid Dynamics Approach for the Modeling of Gas Separation in Membrane Modules
July 03, 2019
Processes - Volume 7, Issue 7, Article Number 420
A computational fluid dynamics (CFD) approach for the modeling of flux in a polymeric membrane using finite volume method
May 23, 2019
Mechanics and Industry - Volume: 18 Issue: 4
Numerical analysis of a gas separation of CH4/CO2 using hollow fiber membrane module
June 30, 2018
Sigma Journal of Engineering and Natural Sciences - NULL
Computational Fluid Dynamics (CFD) Analysis of Phthalic Anhydride's Yield Using Lab Synthesized and Commercially Available (V2O5/TiO2) Catalyst
April 01, 2018
Engineering Technology & Applied Science Research - Volume 8, No. 2, Pages 2821-2826
A Numerical Comparison of Soave Redlich Kwong and Peng-Robinson Equations of State for Predicting Hydrocarbons? Thermodynamic Properties
February 01, 2018
Engineering Technology & Applied Science Research - Vol. 8, No. 1, 2018, 2422-2426
Computational fluid dynamics based model development and exergy analysis of naphtha reforming reactors
October 21, 2017
International Journal of Exergy - Vol. 24, No. 2-4, Pages:344-363
Numerical Analysis Of Flash Calculation Using Soave Redlich-Kwong Equation Of State With Matlab
September 29, 2017
Sigma Journal Of Engineering And Natural Sciences-Sigma Muhendislik Ve Fenbilimleri Dergisi - NULL
Computational Fluid Dynamics (CFD) Simulation and Comparison for Different Numbers of Baffles to Reduce Concentration Polarization Effects in Membrane Tubes
January 01, 2017
Journal of Engineering and Technological Sciences - Volume 49, Issue 1, Pages 114-131
Development Of User-defined Extension For The Simulation Of Membrane Process In Aspen Hysys
January 01, 2017
Sigma Journal of Engineering and Natural Sciences-Sigma Muhendislik Ve Fen Bilimleri Dergisi - Volume 35, Issue 1, Pages 35-45
Computational Fluid Dynamics (CFD) Modeling of Heat Transfer in a Polymeric-Membrane using Finite Volume Method
December 01, 2016
Journal of Thermal Science - Volume 25, Issue 6, Pages 564-570
Mathematical modelling of membrane gas separation using the finite difference method
July 16, 2016
Pacific Science Review A: Natural science and engineering - Pacific Science Review A: Natural science and engineering, Volume 18, Issue 1, Pages 47–52, January 2016
Prediction of gasoline yield in a fluid catalytic cracking (FCC) riser using k-epsilon turbulence and 4-lump kinetic models: A computational fluid dynamics (CFD) approach
July 01, 2015
Journal of King Saud University - Engineering Sciences - Volume 27, Issue 2, Pages 130-136
Mathematical modeling of helium recovery from a multicomponent fuel gas with polymeric membrane
June 01, 2015
International Journal of Chemical Engineering and Applications - Volume 6, No 3, Pages 173-178
A Computational fluid dynamics (CFD) comparison of 3-Lump and 4-Lump kinetic models for predicting gasoline, light gases and coke yield in fluid catalytic cracking (FCC) riser
January 01, 2015
Mechanics & Industry - Volume 16, Number 4, Article Number 402
Numerical analysis of friction factor for a fully developed turbulent flow using k?e turbulence model with enhanced wall treatment
December 01, 2014
Beni-Suef University Journal of Basic and Applied Sciences - Volume 3, Issue 4, Pages 269-277
Comparison of physico-chemical, advanced oxidation and biological techniques for the textile wastewater treatment
September 01, 2014
Alexandria Engineering Journal - Volume 53, Issue 3, Pages 717-722, September 2014
Process Design Analyses of CO2 Capture from Natural Gas by Polymer Membrane
June 01, 2014
Journal of the Chemical Society of Pakistan - Volume 36, Issue 3, Pages 411-421
Comparing Numerical Methods for Multicomponent Gas Separation by Single Permeation Unit
January 01, 2014
Chiang Mai Journal of Science - Volume 41, Issue 1, Pages 184-199
A new type of shooting method for nonlinear boundary value problems
December 01, 2013
Alexandria Engineering Journal - Volume 52, Issue 4, Pages 801–805
An Alternate Mathematical Approach to Recover Hydrogen with High Permeate Purity from Gas Streams of Small-Medium Level Oil Refineries
June 03, 2013
Journal of the Chemical Society of Pakistan - Volume 35, Issue 3, Pages 621-628
A comparison of numerical methods used to solve cross flow model for multicomponent membrane gas separation
January 01, 2013
World Applied Sciences Journal - Volume 22, Issue 5, Pages 703-711
An Efficient Numerical Approach for the Separation of Gases Using Membrane in a Multicomponent Gas Mixture
December 01, 2012
International Journal of Chemical Engineering and Applications - Vol. 3, No. 6, Pages 430-433
Computational fluid dynamics (CFD) prediction of mass fraction profiles of gas oil and gasoline in fluid catalytic cracking (FCC) riser
April 03, 2012
Ain Shams Engineering Journal - Volume 3, Issue 4, Pages 403-409
Conferences
Constructive Methods for Boundary Value Problems: Optimizing Heat and Mass Transfer in Porous Materials
July 21, 2025 - July 25, 2025
Muhammad Ahsan,
15th ISAAC (International Society for Analysis, its Applications and Computation) Congress
Computational Analysis of Permeance Prediction for Gas Separation Membrane Using Countercurrent Flow Model
July 19, 2024 - July 22, 2024
Muahammad Ahsan, Thomas LETTENBICHLER,
28th International Conference on Circuits, Systems, Communications and Computers (CSCC)
Machine Learning-Enabled Prediction and Optimization of Sulfur Recovery Units: A Step towards Industry 4.0 Integration
November 22, 2023 - November 23, 2023
Imran Khan, Husnain Saghir, Muhammad Ahsan,
6th Conference on Emerging Materials and Processes (CEMP 2023), Islamabad, Pakistan, 22–23 November 2023.
Mathematical Modeling and Simulation of Coal Gasification Process by Applying Pinch and Cost Analysis
August 15, 2022 - August 19, 2022
Muhammad Ahsan, Muhammad Shoaib Zafar,
92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics
An alternate approach for the numerical modeling of isothermal flash calculation using Peng-Robinson equation of state
October 29, 2018 - November 01, 2018
Bilal Hussain, Muhammad Ahsan, Arshad Hussain,
International Conference on Industrial Engineering & Operations Management Pretoria / Johannesburg, South Africa
A numerical modeling of natural gas using multistage membrane permeation
December 03, 2017 - December 08, 2017
Dr. Muhammad Ahsan, Dr. Arshad Hussain,
22nd International Congress on Modelling and Simulation (MODSIM2017)
TVF
National University of Sciences and Technology
November 01, 2011 - February 21, 2017