Summary
Dr Muhammad Shahid has been working in NUST since 2007 as Professor. Previously, he taught at GIK Institute after working in industry for 15 years. He is a Metallurgical Engineer since 1983.
Academic Background
PhD
(Corrosion and Protection) University of Manchester
November 01, 1988 - April 30, 1991
Honours and Awards
ORS award
Overseas Research Student award during PhD in UK.
March 15, 1989
Publications
Incorporation of Ceramic-Based Lyophilized Sepiolite Clay Enhances Mechanical Properties and Thermal Stability of HDPE
June 06, 2025
Polymer Composites -
A Review of Advanced Electrode Materials for Supercapacitors: Challenges and Opportunities
September 01, 2023
Journal of Electronic Materials - Volume 52, Pages 5775-5794
In-situ synthesis of crystalline MoS2@ZIF-67 nanocomposite for efficient removal of Methyl Orange Dye from aqueous media
July 30, 2023
Micromachines - Volume 14(8), Article Number 1534
Improved anti-corrosion and mechanical aspects of reinforced cementitious composites with bio-inspired strategies
July 01, 2023
Journal of Building Engineering - Volume 70, Article Number 105930
The Synergistic Effect of Polystyrene/Modified Boron Nitride Composites for Enhanced Mechanical, Thermal and Conductive Properties
January 02, 2023
Polymers - Volume 15(1), Article Number 235
Polystyrene-Sepiolite Clay Nanocomposites with Enhanced Mechanical and Thermal Properties
August 30, 2022
Polymers - Volume 14, Issue 17, Article Number 3576
Corrosion Inhibition of Low Carbon Steel in Soil Solutions, Using Novel Schiff Base Inhibitor
August 30, 2022
Solid State Phenomena - Volume 336, Pages 25-33
An integrated and eco-friendly approach for corrosion inhibition and microstructural densification of reinforced concrete by immobilizing Bacillus subtilis in pyrolytic sugarcane-bagasse
June 25, 2022
Journal of Cleaner Production - Volume 355, Article Number 131785
Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns
May 27, 2022
Crystals - Volume 12, Issue 6, Article Number 781
Synthesis of Magnetic Fe3O4 Nano Hollow Spheres for Industrial TNT Wastewater Treatment
March 07, 2022
Nanomaterials - Volume 12, Issue 5, Article Number 881
Microstructure and Corrosion Behavior of Atmospheric Plasma Sprayed NiCoCrAlFe High Entropy Alloy Coating
February 16, 2022
Materials - Volume 15, Issue 4, Article Number 1486
Electrochemical Water Splitting Using NiO-NiFe2O4/MWCNTs Nanocomposite as Electrocatalyst
December 31, 2021
NUST Journal of Engineering Sciences - Volume 14, No. 2, Pages 41-49
Enhancement in bonding strength and ageingresistance of polychloroprene solvent-baseadhesives through graft copolymerization
August 16, 2021
Journal of Adhesion Science and Technology - Volume 35, No.16, Pages 1752-1763
Stress Corrosion Cracking of Lean Duplex Steel in 3.5% Sodium Chloride Solution, in Recent Trends in Chemical and Material Sciences Vol. 1
July 07, 2021
Book on Recent Trends in Chemical and Material Sciences - Chapter 2, Pages 12-20
Effect of high energy ball milling and low temperature densification of plate-like alumina powder
May 01, 2021
Powder Technology - Volume 383, Pages 84-92
Development and Aging Behaviour of Solvent-Based Polychloroprene Rubber Nano-Adhesive Using Multiwall Carbon Nanotubes
September 28, 2020
Journal of Materials Science and Chemical Engineering - Volume 8(9), Pages 31-44
Percolation phenomena of dielectric permittivity of a microwave-sintered BaTiO3–Ag nanocomposite for high energy capacitor
May 05, 2020
Journal of Alloys and Compounds - Volume 822, Article Number 153525
Interface Adhesion Strength of Adhesive-Bonded Materials Using Ultrasonic Technique
November 08, 2019
Journal of Multidisciplinary Approaches in Science - Volume 11, Issue 1, Pages 8-17
Design assisted fatigue failure of an aircraft's pole piece assembly
November 01, 2019
Engineering Failure Analysis - Volume 105, Pages 246-254
Corrosion protection with eco-friendly inhibitors
May 27, 2019
Advances in Natural Sciences: Nanoscience and Nanotechnology - Advances in Natural Sciences: Nanoscience and Nanotechnology Vol. 2, Article No.043001, Pages 06, 31 Oct 2011
In-situ corrosion monitoring under flowing conditions; a review
April 23, 2019
Science International-Lahore - Volume 31, Issue 2, Pages 325-330
Electrochemical corrosion and bacterial adhesion study of Two Osteosynthetic Maxillofacial Bone Plates
April 01, 2019
Journal of the Pakistan Medical Association - Volume: 69, Issue: 4, Pages: 514-517
Electrochemical Comparison of SAN/PANI/FLG and ZnO/GO Coated Cast Iron Subject to Corrosive Environments
November 11, 2018
Materials - Volume: 11, Issue: 11, Article No.223
Stress relaxation behavior of annealed aluminum-carbon nanotube composite
September 01, 2018
Science and Engineering of Composite Materials - NULL
Electrochemical Study of Polymer and Ceramic-Based Nanocomposite Coatings for Corrosion Protection of Cast Iron Pipeline
February 25, 2018
Materials - Vol.11(3)
Effect of heating on the structural and optical properties of TiO2 nanoparticles: antibacterial activity
February 01, 2018
Applied Nanoscience - Volume 8, Issue 1-2, Pages 11-18
Effect of multiple repair welding on mechanical performance and corrosion resistance of quenched and tempered 30CrMnSiA steel
April 01, 2017
Journal of the Brazilian Society of Mechanical Sciences and Engineering - Volume 39, Issue 4, Pages 1233-1243
Photo-stability and photo-sensitizing characterization of selected sunscreens? ingredients
January 01, 2017
Journal of Photochemistry and Photobiology A: Chemistry - Volume 332, Pages 241-250
Strengthening and the Mechanism in Al-CNT nanocomposite Fabricated by Induction Melting
November 06, 2016
International Journal of Materials and Metallurgical Engineering - Vol.10, No.6, Pages 682-687
Adsorption of Cd2+ ions on plant mediated SnO2 nanoparticles
October 01, 2016
Materials Research Express - Volume 3, Issue 10, Article Number 105019
Microstructure and lifetime of EB-PVD TBCs with Hf-doped bond coat and Gd-zirconate ceramic top coat on CMSX-4 substrates
August 15, 2016
Surface and Coatings Technology - Volume 299, Pages 104-112
Thermogravimetric, Differential Scanning Calorimetric and Experimental Thermal Transport Study of Functionalized Nanokaolinite Doped Elastomeric Nanocomposites
August 01, 2016
Journal of Thermal Analysis and Calorimetry - Volume: 125, Issue: 2 Pages: 871-880
Carbon nanotube-reinforced aluminum composite produced by induction melting
August 01, 2016
Journal of Applied Research and Technology - Volume 14, Issue 4,Pages 215-224
Cladding of Ni-20Cr Coatings by Optimizing the CO2 Laser Parameters
June 01, 2016
Arabian Journal for Science and Engineering - Volume: 41 Issue: 6 Pages: 2353-2362
Hot Corrosion of Yttria-Stabilized Zirconia Coating, in a Mixture of Sodium Sulfate and Vanadium Oxide at 950 degrees C
February 15, 2016
Journal of Thermal Spray Technology - Volume 25, Issue 3, Pages 567-579
Evaluation of Titanium Nitride-Modified Bondcoat System Used in Thermal Barrier Coating in Corrosive Salts Environment at High Temperature
December 01, 2015
journal of thermal spray technology - Volume 24, Issue 8, Pages 1520–1528
Heat treatment of electrodeposited NiO films for improved catalytic water oxidation
October 06, 2015
RCS Advances - Volume 5, Issue 105, Pages 86713-86722
Negative Poisson's ratio behavior of idealized elastomeric auxetic cellular structures for various carbon black nanoparticles loadings
October 01, 2015
Journal of Elastomers & Plastics - Journal of Elastomers & Plastics, Volume: 47 issue: 6, page(s): 479-487
A Facile One-Step Method of Coating Aluminum on Multiwall Carbon Nanotubes
September 15, 2015
Journal of Alloys and Compounds - Volume 643, Pages 74-78
Laser Cladding to Improve Oxidation Behavior of Air Plasma-Sprayed Ni-20Cr Coating on Stainless Steel Substrate
September 01, 2015
Journal of Materials Engineering and Performance - Volume 24, Issue 9, Pages 3651-3657
Effect of Bondcoat Thickness on High Temperature Hot Corrosion of ZrO2-8Y2O3 Thermal Barrier Coating
August 05, 2015
ACTA Physica Plonica A - Volume 128, Issue 2B, Pages B314-B316
Fractographic Evaluation of Crack Initiation and Growth in Al-CNTs Nanocomposite Fabricated by Induction Melting
August 01, 2015
ACTA Physica Polonica A - Volume 128, Issue 2B, Pages B276-B278
Effect of Na2SO4-V2O5 Mixture on Y2O3 Stabilized ZrO2 Thermal Barrier Coatings Exposed at High Temperature
April 01, 2015
Advanced Materials Research - Volume 1101, Pages 423-427
Tribological Properties of MWCNTs Strengthened Aluminum Composite Fabricated by Induction Melting
April 01, 2015
Advanced Materials Research - Volume 1101, Pages 62-65
On the designing, efficiency and stirring force of an induction coil for the processing of prototype Al based nanocomposites
December 31, 2014
Journal of Metallurgy - Volume 2014, Article ID 637031, 6 pages
Synthesis of carboxymethyl cellulose from waste of cotton ginning industry
November 26, 2014
Carbohydrate Polymers - Volume: 113, Pages: 249-255
Strengthening of Bisphenol-A Epoxy Resin by the Addition of Multi-Wall Carbon Nanotubes
August 01, 2014
Arabian Journal for Science and Engineering - Volume 39 Issue 8 Pages 6411-6420
Optimization of ethanol flow rate for improved catalytic activity of Ni particles to synthesize MWCNTs using a CVD reactor
June 01, 2014
Materials Research-IBERO-American Journal of Materials - MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS Volume: 17 Issue: 3 Pages: 739-746, June 2014
Fabrication and thermal characteristics of functionalized carbon nanotubes impregnated polydimethylsiloxane nanocomposites
March 27, 2014
Journal of Composite Materials - Volume 49 Issue 8 Pages 995-1006
Structural, Viscoelastic, and Vulcanization Study of Sponge Ethylene?Propylene?Diene Monomer Composites with Various Carbon Black Loadings
January 05, 2014
Journal of Applied Polymer Science - Volume 131 Issue 1 Article Number 39423
Carbon Nanotube/nanodiamond Reinforced Carbon Fiber Epoxy Matrix Composites ? Processing and Characterization
July 24, 2013
NUST Journal of Engineering Sciences - Volume 6, Issue 1
Synthesis of Laser Beam Rapidly Solidified Novel Surfaces on D2 Tool Steel
May 14, 2012
Key Engineering Materials - Volumes 510-511, Pages 493-499
Effect of current on substrates? stability in LIPAA (laser induced plasma assisted ablation) process
July 12, 2011
NUST Journal of Engineering Sciences - Vol. 4, No. 1, Pages 34-36
Effect of hydrogen sulfide gas concentration on the corrosion behavior of astm a-106 grade-a carbon steel in 14 diethanol amine solution
December 16, 2009
Arabian Journal for Science and Engineering - Volume 34, Issue 2C, Pages 179-186
Orange dye thin film electrochemical hygrometers
April 20, 2005
Eurasian Chemico-Technological Journal - Vol. 7, Pages 85-88
Mechanism of film growth during anodizing of Al-Li alloy / SiC metal matrix composite in sulfuric acid electrolyte
July 23, 1997
Journal of Materials Science - Volume 32, Issue 143
Conferences
Flame Retardant Nanocomposites of Polystyrene-Modified Sepiolite Clay
April 16, 2023 - April 16, 2023
Shafi Ur rehman, Sana Javaid, Muhammad Shahid, Tariq Yasin, Badar Rashid,
1st International Conference on Modern Technologies in Mechanical & Material Engineering
Induction melting as a fabrication route for Al-CNTs nanocomposite
June 06, 2016 - June 07, 2016
Muhammad Shahid, Muhammad Mansoor,
ICACM 2016 : 18th International Conference on Advanced Composite Materials
Tribological Properties of MWCNTs Strengthened Aluminum Composite Fabricated by Induction Melting
January 24, 2015 - January 26, 2015
Muhammad Mansoor, Muhammad Shaid,
ICNMS 2015 : 2015 3rd International Conference on Nano and Materials Science
Auxetic nanocomposite based on styrene butadiene rubber (SBR) foam with varying nano-carbon loading
November 16, 2014 - November 20, 2014
Muhammad Tanweer Khan, Muhammad Shahid, M Arshad Bashir, Quratulain,
Advances in Materials and Processing Technology Conference
On the Stress Corrosion Cracking of Lean Duplex Steel in Chloride Environment
September 23, 2013 - September 27, 2013
Qanita Tayyaba, Hina Farooq, Muhammad Shahid, Ammer Khan Jadoon, M Shahzad, A H Qureshi,
International Symposium on Advanced Materials (ISAM 2013)
Corrosion and Passivation behavior of Various Stainless Steels in LiBr solutions used in absorption-type refrigeration system
September 03, 2007 - September 07, 2007
M Shahid,
International Symposium on Advanced Materials
Corrosion study of API 5L X-series pipeline steels in 3.5% NaCl solution under varying environments
September 08, 2003 - September 11, 2003
M Shahid, M I Qureshi, M U Farooq, M I Khan,
International Symposium on Advanced Materials
Corrosion of Al-Li alloy/SiC metal matrix composite during anodizing in phosphoric acid electrolyte
September 21, 1997 - September 25, 1997
Muhammad Shahid, G E Thompson,
Proc. Conf. on ‘Advanced Materials
Characterization of ceramic-reinforced epoxy-based composite materials
September 21, 1997 - September 25, 1997
A Quddos, M Shahid, S zulfiqar,
Proc. Conf. on ‘Advanced Materials-97
Associate Professor
GIK Institute of Engineering Sciences & Technology
December 12, 2000 - December 31, 2006
Principal Engineer
KRL
October 07, 1985 - August 24, 2001
Captain
Pak Army
February 12, 1983 - September 30, 1985