School of Chemical & Materials Engineering (SCME)
Faculty Amir Azam Khan

Amir Azam Khan

Principal of School of Chemical & Materials Engineering
  • School of Chemical & Materials Engineering
  • 5190855001
Summary

Academic Background
PhD (Ceramic Materials And Surface Treatment) Université de Limoges May 21, 1991 - June 01, 1995
Honours and Awards
Publications
Microstructure Evaluation and Impurities in La Containing Silicon Oxynitrides July 23, 2021 Abbas Saeed Hakeem, Sharafat Ali, Thomas Hoche, Qasem Ahmed Drmosh, Amir Azam Khan, Bo Jonson, Nanomaterials - Volume 11(8), Article Number 1896
Sliding Friction Behavior of Sintered Ni-Cr Composites with Solid Lubricants February 04, 2021 Wan Farhana Mohamad, Amir Azam Khan, Pierre Barroy, Olivier Durand Drouhin, Clement Puille, Abdelilah Lahmar, Faiz Ahmad, Key Engineering Materials - Volume 875, Pages 272-279
Phase analysis and microstructure study of sintered Ni Cr composites containing MoS2 , Ag and CaF 2 additives as solid lubricants June 01, 2020 Wan Farhana Mohamad, Amir Azam Khan, Faiz Ahmad, Abdullah Yassin, Journal of Mechanical Engineering and Sciences - Volume 14, Issue 2, Pages 6548-6556
A Feasibility Study of Low-Power Laser Trepanning Drilling of Composite Using ModifiedDVDWriter February 27, 2020 Nurfairuz Nadirah Affandi, Khairul Fikri Tamrin, Amir Azam Khan, Kaveh Moghadasi, Mohd Ridzuan Mohamad Sharip, Shahrol Mohamaddan, Anamul Hossain, International Journal of Integrated Engineering - Volume 12(3), Pages 187-196
Synthesis and Characterization of lead-free piezoelectric (K0.5Na0.5)NbO3 produced with improved calcination temperature” February 27, 2020 Nor Amalina Ahmad, Dzetty Soraya Abdul Aziz, Norni Hidayawati Mat Daud, Rahim Noor, Amir Azam Khan, Jurnal Teknologi: Sciences & Engineering - Volume 82(2), Pages 139-147
The Property Characterization of α-Sialon/Ni Composites Synthesized by Spark Plasma Sintering November 25, 2019 Adedayo Sheriff Adeniyi, Bilal Anjum Ahmed, Abbas Saeed Hakeem , Faheemuddin Patel , Akolade Idris Bakare , Anwar Ul-Hamid , Anwar Ul-Hamid , Amir Azam Khan , Amir Azam Khan , Muhammad Ali Ehsan , Muhammad Ali Ehsan , Tahir Irfan Khan, Tahir Irfan Khan, Nanomaterials - Volume 9, Issue 12, Article Number 682
Development of amino-functionalized silica nanoparticles for efficient and rapid removal of COD from pre-treated palm oil effluent March 01, 2019 Syed Salman Shafqat, Amir Azam Khan, Muhammad Nadeem Zafar, Mohammed Haji Alhaji, Khairuddin Sanaullah, Syed Rizwan Shafqat, Shahzad Murtazaa, Suh Cem Pange, Journal of Materials Research and Technology - Volume 8, Issue 1, Pages 385-395
Removal of Congo Red Dye from Aqueous Solution using Branches of Ficus religiosa March 31, 2018 Syed Salman Shafqat, Maria Nosheen, Amir Azam Khan, Syed Rizwan Shafqat, Shahzad Murtaza, Muhammad Zubair, Muhammad Nadeem Zafar, Malaysian Applied Biology - Volume 47(1), Pages 103-108
An evaluation of the B4C formation in sintered ZrB2-SiC ceramic composites at 2100 °C February 25, 2018 Dayang Salyani Abang Mahmod, Amir Azam Khan, Nicolas Glandut, Jean-Claude Labbe, Journal of Alloys and Compounds - Volume 735, Pages 510-515
Green Synthesis and Characterization of 3 Carboxycoumarin and Ethylcoumarin-3-carboxylate via Knoevenagel Condensation January 01, 2017 Syed Salman Shafqat, Amir Azam Khan, Misbahul Ain Khan, Shanti Faridah Salleh, Mohd Syahmi Jamaludin, Pang Suh Cem, Asian Journal of Chemistry - Vol. 29, No 2, Pages 261-266
The Effect of Thermal Perturbation on a Polymer Material’s Tensile Test via Simulation and Experimental Analysis May 05, 2016 M.Q.Sazali, M.S.Z.M.Suffian, Amir Azam Khan, S. Mohamaddan, A. Yassin, M. Yusof, S.A. Rashidi, M.H.I. Saad, Journal of Telecommunication, Electronic and Computer Engineering - Volume 8, No. 12, Pages 141-145
Efficient Eco-Friendly Synthesis of Pyrazole Acryloyl Analogues by Amino Acid Catalysis April 28, 2016 Faryal Chaudhry, Nadia Asif, Syed Salman Shafqat, Amir Azam Khan, Munawar Ali Munawar, Misbahul Ain Khan, Synthetic Communications - Volume 46, Issue 8, Pages 701-709
Surface oxidation of porous ZrB2-SiC ceramic composites by continuous-wave ytterbium fibre laser December 01, 2015 Dayang Salyani Abang Mahmo, Nicolas Glandut, Amir Azam Khan, Jean-Claude Labbe, Applied Surface Science - Volume 357, Part B, Pages 1982-1990
N-succinyl chitosan preparation, characterization, properties and biomedical applications: A state of the art review, September 15, 2015 Shahid Bashir, Yin Yin Teo, S. Ramesh, K. Ramesh, Amir Azam Khan, Reviews in Chemical Engineering - Volume 31(6), Pages 563-597
Synthesis of Arylidene Propanedioic Acids, by Knoevenagel Condensation for use in Ceramic Sols December 01, 2014 Syed Salman Shafqat, Misbahul Ain Khan, Azham Zulkharnain, Sinin Hamdan, Andrew Ragai Henry Rigit, Amir Azam Khan, Asian journal of Chemistry - Volume 26, Issue 24, Pages 8463-8466
The effect of sound absorption coefficient of particle addition to polyurethane matrix composites October 25, 2014 Yiong Ngee Fe, Amir Azam Khan, Australian Journal of Basic and Applied Sciences - Volume 8(15), Special 2014, Pages 246-251
Advanced ceramic matrix composites for high energy x-ray generation January 12, 2012 Amir Azam Khan, Jean Claude Labbe, Advances in Natural Sciences: Nanoscience and Nanotechnology - Volume 2, Article Number 045015
Strontium Doped Lead Zirconate Titanate Ceramics: Study of Calcination and Sintering Process to Improve Piezo Effect June 01, 2011 Muhammad Khalid, Muhammad Shoaib, Amir Azam Khan, Journal of Nanoscience and Nanotechnology - Volume 11, Number 6, Pages 5440-5445
Influence of Nano-Aiumina and Mullite on the Sintering Behavior of Hotpressed Silicon Carbide December 31, 2008 Amir Azam Khan , Shahid Rasul, Daniel Tetard, J. C. Labbe, NUST Journal of Engineering Sciences - Volume 1, Issue 1, Pages 91-96
Influence of substrate surface conditions on the plasma sprayed ceramic and metallic particles flattening December 21, 2005 A.A.Syed, A.Denoirjean, B.Hannoyer, P.Fauchais, P. Denoirjean, Amir Azam Khan, J.C.Labbe, Surface and Coatings Technology - Volume 200, Issue 7, Pages 2317-2331
Effect of oxide additives and particle size on stabilization of treated commercial zirconia October 01, 2001 Maham Yasmeen, Syed Asif Ansar, Amir Azam Khan, Thierry Joyeux, Jean Claude Labbe, Journal of Materials Engineering and Performance - Volume 10, Pages542-547
Processing and microstructure of alumina-based composites August 01, 1999 M. Mujahid, M.I. Qureshi, M. Islam, Amir Azam Khan, Journal of Materials Engineering and Performance - Volume 8(4), Pages 496-500
Effect of heating cycle on the structure of Ag films deposited over porcelain substrates December 01, 1998 Amir Azam Khan, J.C. Labbe, Journal of Materials Engineering and Performance - Volume 7, Issue 6, Pages 757-760
Aluminium nitride-molybdenum ceramic matrix composites. Influence of molybdenum addition on electrical, mechanical and thermal properties July 07, 1997 Amir Azam Khan, Jean Claude Labbe, Journal of the European Ceramic Society - Volume 17, Issues 15-16, Pages 1885-1890
Aluminium nitride–molybdenum ceramic matrix composites: influence of molybdenum concentration on the mechanical properties July 01, 1997 Amir Azam Khan, J.C. Labbe, Journal of Materials Science - Volume 32, Pages 3829-3833
Molybdenum ceramic matrix composites possessing high thermal shock resistance July 01, 1997 Amir Azam Khan, Jean Claud Labbe , Materials Science and Engineering A - Volume 230, Issues 1–2, Pages 33-38
Molybdenum and tungsten coatings for X. Ray targets, obtained through Low Pressure Plasma Spraying process June 01, 1997 Amir Azam Khan, J. C. Labbe, A. Grimaud, P. Fauchais, Journal of Thermal Spray Technology - Volume 6, Issue 2, Pages 228-234
Influence of molybdenum on thermal properties of CMCs January 01, 1996 Amir Azam Khan, J. C. Labbe, American Ceramic Society Bulletin - Volume 75(8), Pages 52-56
Aluminium Nitride-Molybdenum Ceramic Matrix Composites: Characterization of Ceramic-Metal Interface January 01, 1996 Amir Azam Khan, J. C. Labbe, Journal of the European ceramic Society - Volume 16, Issue 7, Pages 739-744
Conferences
Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process October 26, 2016 - October 27, 2016 Mohamad W.F., Amir Azam Khan, Ahmad F, Abdullah Yassin, 9th International UNIMAS-STEM Engineering Conference, 26-27 October, 2016 Kuching, Malaysia
Environmentally Benign Syntheses and Characterization of 4-Aryldihydropyrimidin-2 (1H)-ones October 26, 2016 - October 28, 2016 Syed Salman Shafqat, Amir Azam Khan, Misbahul Ain Khan, Nicholas Kuan Hoo Tien, Mohd Syahmi Jamaludin, Pang Suh Cem, 9th International UNIMAS-STEM Engineering Conference
Laser surface treatment of porous ceramic substrate for application in solid oxide fuel cells October 16, 2016 - October 12, 2016 Mahmod D.S.A., Amir Azam Khan, Munot M.A., Glandut N., Labbe J.C., 14th International Symposium on Advanced Materials (ISAM2015),
Effect of mold designs on molten metal behaviour in high-pressure die casting May 21, 2016 - May 23, 2016 M D Ibrahim, M R A Rahman, A A Khan, M R Mohamad [, M S Z M Suffian, Y S Yunos, L K Wong, M Z Mohtar, 15th Asian Congress of Fluid Mechanics
Synthesis and characterization of heterocyclic-ORMOCERS composites through Sol-gel process: A Review September 18, 2014 - September 17, 2014 Amir Azam Khan, Syed Salman Shafqat, Sinin Hamdan, Sinin Hamdan, Nicholas Kuan Hoo Tien, Shanti Faridah Saleh, 5th International Conference on Science & Technology: Applications in Industry & Education (ICSTIE 2014)
Surface engineering glass-metal coatings designed for induction heating of ceramic components September 27, 2013 - September 23, 2013 Amir Azam Khan, J.C. Labbe, 13th International Symposium on Advanced Materials (ISAM2013)
Study of Heat Treatment Cycle of Aluminum Magnesium (AA6061) Heat Treatable Alloys for Structural Applications July 15, 2011 - July 13, 2011 Amir Azam Khan, S. A/L GUNASEKHARAN, 7th International Conference on Steel & Aluminum Structures, 13-15 July, 2011, Kuching
Effect of Silica and Magnesia addition on the densification and structure of sintered alumina. September 19, 1999 - September 23, 1999 Amir Azam Khan , M.Islam, 6th Int. Symp. On Advanced Materials
Professor Universiti Malaysia Sarawak November 01, 2009 - August 22, 2020
Assoc Prof & Controller of Exa GIKI, Topi January 01, 2001 - June 01, 2005
Asst Prof GIKI, Topi October 01, 1996 - December 01, 2000
Post-doc University of Limoges, France September 01, 1995 - July 01, 1996